Infinity's Kappa Series 60.11cs 6-3/4" component speakers continue in the tradition of this legendary line of speakers, offering rugged construction and impressive sound quality. Once installed, this system will bring out every nuance and detail in your favorite music tracks, making time spent in your car seem more like a concert than a commute.
Product Highlights:
- component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
- 6-3/4" Plus One+ glass-fiber woofer with hi-roll rubber surround
- adapter rings included for 6-1/2" openings
- 3/4" edge-driven soft dome tweeter
- Starfish™ mounting brackets for easier tweeter installation in factory locations
- 2-way external crossover network
- 2-ohm impedance
- tweeter adjustment circuits (0, +3 dB)
- power range: 5-90 watts RMS (270 watts peak power)
- frequency response: 45-35,000 Hz
- sensitivity: 93 dB
- woofer top-mount depth: 2-1/8"
Woofers
Plus One Woofer Cones: The Plus One woofer cones offer more surface area than other speakers that fit in the same size opening. This is accomplished by using a new basket design and hi-roll surround. The result is greater bass output and a significant increase in efficiency.
Formed Glass Fiber Woofer Cones: The formed glass fiber cone material is very light and extremely stiff, minimizing flex. This results in very low distortion and improved clarity.
iCGM frames: The Kappa series speaker baskets are made of composite Injected Carbon Glass Matrix (iCGM). iCGM is lighter and stronger than stamped steel; it retains its shape, even when mounted on uneven surfaces (common in car mounting locations), plus offers exceptional damping of any resonances.
Woofer Size: This component set is marketed as having 6-1/2" woofers; they will fit in standard 6-1/2" speaker openings (approximately 5" diameter), but do not use the standard 6-1/2" speaker bolt pattern. In order to install them in standard 6-1/2" speaker openings you must drill new screw holes. If new holes are drilled in the mounting surface of the car, no bracket is needed. If drilling in the car is not an option, the included brackets can be used, which have standard 6-1/2" mounting holes and the Ford non-symmetric four hole pattern. When using the brackets the depth becomes 1.885" and the mounting height becomes 0.773".
Terminals: The woofers' input terminals are gold-plated set screws that will accept up to 12 gauge bare wire.
High-Output Design: The high output 2-ohm voice coil design compensates for the high in-line resistance of small gauge factory wiring and extracts every watt from factory receivers, increasing overall system output and efficiency (relative to 4 ohm speakers). The speaker's 2.0-ohm impedance combined with the impedance of the factory speaker wire presents a true 4-ohm load to your connected headunit or amplifier. The speakers also benefit from increased power when you upgrade the wire and add aftermarket amplifiers, designed to power a 2-ohm load.
Tweeters
Edge Driven: The 3/4" edge-driven tweeters use textile soft domes. An edge-driven tweeter has better dispersion characteristics and allows for a lower crossover frequency than typical tweeters of the same size, which improves imaging. The result is improved vocals and musical clarity.
Tweeter Mounting: The I-Mount tweeter mounting system and Starfish mounting brackets give you several different ways to mount the tweeters:
- I-Mount Tweeter Mounting System: The tweeters can be surface or flush mounted with Infinity's innovative I-Mount system:
o Surface Mount: Surface mounting the tweeters involves screwing the surface-mount cup to the mounting location, then inserting and locking the tweeter into the cup.
o Flush Mount: Flush mounting is made easy through the use of the threaded flush-mount adapter and plastic locking nut. Once a cutout is made, the flush-mount adapter (with the tweeter installed) is inserted into the hole. The large plastic locking nut is threaded onto the adapter (from behind the mounting surface) to hold the complete assembly securely in place. When flush mounted, the tweeters may be angled for optimum response and imaging.
- Starfish Mounting Brackets: The Starfish mounting brackets allow the tweeters to be installed in factory locations behind the grilles:
o Surface Mount (behind grille panel): Once the Starfish bracket is trimmed, it is screwed to the mounting surface behind the grille panel. Then, the tweeter is inserted into the bracket and locked into place.
o Flush Mount (behind grille panel): Once the Starfish bracket is trimmed, it is dropped into the cutout in the mounting surface behind the grille panel. Then, the tweeter is inserted into the bracket and locked into place.
o Bottom Mount (to grille panel): Once the Starfish bracket is trimmed, it is secured to the underside of the grille panel. The tweeter must be inserted into the bracket and locked into place before the bracket is mounted.
o Flush Mount (in-dash location): Once the Starfish bracket is trimmed, it is dropped into the cutout in the dash. Then, the tweeter is inserted into the bracket and locked into place.
Crossovers
Crossovers: The crossovers use low-loss air core inductors, low-hysteresis polypropylene capacitors, and high-quality resistors. Each crossover has a tweeter output level switch; choose between flat and +3dB.
Connections: Each crossover has set screw input and output terminals that will accept up to 10 gauge bare wire.
Crossover Dimensions:
- Length: 3-3/16"
- Width: 4"
- Height: 1-3/8"
Power Handling: Although Infinity lists the RMS power handling as 90 watts, they also list the recommended power range as 5-200 watts RMS. We've opted to list the more conservative 90 watt RMS figure on the specifications page.
Infinity's Kappa Series 60.11cs 6-3/4" component speakers continue in the tradition of this legendary line of speakers, offering rugged construction and impressive sound quality. Once installed, this system will bring out every nuance and detail in your favorite music tracks, making time spent in your car seem more like a concert than a commute.
Product Highlights:
- component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
- 6-3/4" Plus One+ glass-fiber woofer with hi-roll rubber surround
- adapter rings included for 6-1/2" openings
- 3/4" edge-driven soft dome tweeter
- Starfish™ mounting brackets for easier tweeter installation in factory locations
- 2-way external crossover network
- 2-ohm impedance
- tweeter adjustment circuits (0, +3 dB)
- power range: 5-90 watts RMS (270 watts peak power)
- frequency response: 45-35,000 Hz
- sensitivity: 93 dB
- woofer top-mount depth: 2-1/8"
Woofers
Plus One Woofer Cones: The Plus One woofer cones offer more surface area than other speakers that fit in the same size opening. This is accomplished by using a new basket design and hi-roll surround. The result is greater bass output and a significant increase in efficiency.
Formed Glass Fiber Woofer Cones: The formed glass fiber cone material is very light and extremely stiff, minimizing flex. This results in very low distortion and improved clarity.
iCGM frames: The Kappa series speaker baskets are made of composite Injected Carbon Glass Matrix (iCGM). iCGM is lighter and stronger than stamped steel; it retains its shape, even when mounted on uneven surfaces (common in car mounting locations), plus offers exceptional damping of any resonances.
Woofer Size: This component set is marketed as having 6-1/2" woofers; they will fit in standard 6-1/2" speaker openings (approximately 5" diameter), but do not use the standard 6-1/2" speaker bolt pattern. In order to install them in standard 6-1/2" speaker openings you must drill new screw holes. If new holes are drilled in the mounting surface of the car, no bracket is needed. If drilling in the car is not an option, the included brackets can be used, which have standard 6-1/2" mounting holes and the Ford non-symmetric four hole pattern. When using the brackets the depth becomes 1.885" and the mounting height becomes 0.773".
Terminals: The woofers' input terminals are gold-plated set screws that will accept up to 12 gauge bare wire.
High-Output Design: The high output 2-ohm voice coil design compensates for the high in-line resistance of small gauge factory wiring and extracts every watt from factory receivers, increasing overall system output and efficiency (relative to 4 ohm speakers). The speaker's 2.0-ohm impedance combined with the impedance of the factory speaker wire presents a true 4-ohm load to your connected headunit or amplifier. The speakers also benefit from increased power when you upgrade the wire and add aftermarket amplifiers, designed to power a 2-ohm load.
Tweeters
Edge Driven: The 3/4" edge-driven tweeters use textile soft domes. An edge-driven tweeter has better dispersion characteristics and allows for a lower crossover frequency than typical tweeters of the same size, which improves imaging. The result is improved vocals and musical clarity.
Tweeter Mounting: The I-Mount tweeter mounting system and Starfish mounting brackets give you several different ways to mount the tweeters:
- I-Mount Tweeter Mounting System: The tweeters can be surface or flush mounted with Infinity's innovative I-Mount system:
o Surface Mount: Surface mounting the tweeters involves screwing the surface-mount cup to the mounting location, then inserting and locking the tweeter into the cup.
o Flush Mount: Flush mounting is made easy through the use of the threaded flush-mount adapter and plastic locking nut. Once a cutout is made, the flush-mount adapter (with the tweeter installed) is inserted into the hole. The large plastic locking nut is threaded onto the adapter (from behind the mounting surface) to hold the complete assembly securely in place. When flush mounted, the tweeters may be angled for optimum response and imaging.
- Starfish Mounting Brackets: The Starfish mounting brackets allow the tweeters to be installed in factory locations behind the grilles:
o Surface Mount (behind grille panel): Once the Starfish bracket is trimmed, it is screwed to the mounting surface behind the grille panel. Then, the tweeter is inserted into the bracket and locked into place.
o Flush Mount (behind grille panel): Once the Starfish bracket is trimmed, it is dropped into the cutout in the mounting surface behind the grille panel. Then, the tweeter is inserted into the bracket and locked into place.
o Bottom Mount (to grille panel): Once the Starfish bracket is trimmed, it is secured to the underside of the grille panel. The tweeter must be inserted into the bracket and locked into place before the bracket is mounted.
o Flush Mount (in-dash location): Once the Starfish bracket is trimmed, it is dropped into the cutout in the dash. Then, the tweeter is inserted into the bracket and locked into place.
Crossovers
Crossovers: The crossovers use low-loss air core inductors, low-hysteresis polypropylene capacitors, and high-quality resistors. Each crossover has a tweeter output level switch; choose between flat and +3dB.
Connections: Each crossover has set screw input and output terminals that will accept up to 10 gauge bare wire.
Crossover Dimensions:
- Length: 3-3/16"
- Width: 4"
- Height: 1-3/8"
Power Handling: Although Infinity lists the RMS power handling as 90 watts, they also list the recommended power range as 5-200 watts RMS. We've opted to list the more conservative 90 watt RMS figure on the specifications page.
